Access Key / Accessibility Navigation

Listen mp3-download

Braille Display Software

Active Braille firmware 4.6

ftp://ftp.helptech.de/public/StartStick/files/products/AB4/software...

December, 6th, 2018

With Active Braille firmware 4.6 we have optimized the initialization during startup. Some devices could enter an infinite reset loop when starting up with version 4.5. The new version 4.6 is fixing this problem.
SmartSwitching: The Active Braille automatically switches to the currently active data source, i.e. to one of the up to three Bluetooth connections which was last active or to the USB connection to the PC.
If no Bluetooth or USB connection is active, the Active Braille automatically switches to internal mode. If the Active Braille is connected to the iPhone via Bluetooth and it goes into the lock screen, it automatically switches to the internal mode. One is then back at the same internal location, e.g. in a note. The iPhone unlocks and boom, the Active Braille is reconnected.
The previous switching to the internal mode with Chord m and the screen reader mode with Cord p is in most cases no longer needed. With Chord 458, you can still switch quickly between connected devices.

New file system: The new file system ensures that the entire storage space on the 16 GB SD card can be used. The previous file system could use internally formatted SD cards only up to 4 GB. The new file system also prevents file corruption in the simultaneous use of many files.

User friendly names per Bluetooth: When switching between devices, the device name now is displayed, e.g. Sigis iPhone.

Actilino 2.0

ftp://ftp.helptech.de/public/StartStick/files/products/ALO/software...

June 12th 2018
The new features in the firmware version 2.0 are:
SmartSwitching:
The Actilino automatically switches to the currently active data source, ie to one of the up to three Bluetooth connections which was last active or to a USB connection to the PC.
If no Bluetooth or USB connection is active, the Actilino automatically switches to internal mode.If the Actilino is connected to an iPhone via Bluetooth, for example, and if it changes to the lock screen, Actilino automatically switches to internal mode. You are then back to the same location in the internal mode from which you switched to the Bluetooth connection, e.g. in a note. When the iPhone is unlocked, the Actilino is automatically reconnected immediately.
The previous switching to the internal mode with Chord m and the screen reader mode with chord p is no longer needed. With Chord 458, you can still quickly switch between connected devices.
New file system:
The new file system ensures that all the space on the 16 GB SD card can be used. The previous file system could use internally formatted SD cards only up to 4 GB.
The new file system also prevents file corruption when using many files.
Standby Wake Up: The active connection can wake up the Actilino from standby.
User friendly names via Bluetooth: When switching, the device name, such as Sigis iPhone, is displayed.

Active Star Version 2.2

ftp://ftp.helptech.de/public/StartStick/files/products/AS4/software...

October 27th, 2017
Active Star firmware version 2.2 also improvs the Bluetooth connectivity with an iPhone significantly like the new Actilino firmware. Therefore, we recommend updating the firmware of your Active Star. In addition, Active Star firmware 2.2 completely suppresses disturbing noise reported when using Bluetooth Audio. We were also able to make improvements for the battery calibration.

Modular Evolution (64/88) Version 1.0.4.0

http://software.handytech.de/ModularEvolution/mex_1040_j3.5.0.0b_s2...

December 09th, 2013
Contains:
• JAWS-Treiber Version 3.5.0.0b
• HAL/Supernova-Treiber Version 2.4.0.0b
• Window-Eyes-Treiber Version 1.5.1.0
With this setup the firmware can be updated to Version 2.02

Basic Braille Setup Version 1.0.0.6

http://software.handytech.de/BasicBraille/BBX_1006_J3.5.0.0b_S2.4.0...

November 27th, 2013
The software package Basic Braille Setup Version 1.0.0.6 includes:
• JAWS-driver version 3.5.0.0
• HAL/Supernova-driver version 2.4.0.0
• Window-Eyes-driver version 1.5.1.0

Braillino Firmware Version 4.31

http://software.handytech.de/Braillino/BL2_FW_V4.31e.exe

May 09th, 2011
Contains:
• Firmware Version 4.31

Braille Star 40 firmware version 4.31

http://software.handytech.de/BrailleStar40/BS4_FW_V4.31e.exe

May 02nd, 2011
Contains:
• Firmware Version 4.31

Braille Star 80 Firmware Version 4.31

http://software.handytech.de/BrailleStar80/BS8_FW_V4.31e.exe

May 02nd, 2011
Contains:
• Firmware Version 4.31

Braille Wave Firmware Version 4.31

http://software.handytech.de/BrailleWave/BRW_FW_V4.31e.exe

May 02nd, 2011
Contains:
• Firmware Version 4.31

 

Contact

Help Tech GmbH
Brunnenstraße 10
72160 Horb-Nordstetten
Tel: +49 74 51 55 46 0
Fax: +49 74 51 55 46 67
Email: info@helptech.de

Dealer Area







Forgot your password?
This website uses cookies to ensure you get the best experience on our website. More info

Subject to modifications. © Copyright 2019 by Help Tech GmbH